SYKORAAUCTIONS.COM PRESENTS!

ONLINE AUCTION

PIONEER POLE BUILDINGS / PIODEL, INC.

7400 S. Clare Ave. Clare, MI 48617

WE HAVE SOLD OUR REAL ESTATE AND THE FOLLOWING BUILDING SUPPLIES AND ROLLING STOCK WILL BE SOLD VIA ONLINE ONLY AUCTION FROM US-127 EXIT 160 CLARE MI. TAKE CLARE AVE. (OLD-27) NORTH 2 ½ MILES NORTH TO 7400 S. CLARE AVE. CLARE, MI. 48167(CLARE, COUNTY MICHIGAN)

Tuesday, November 3, 2026 — Soft Closing 7 PM

Onsite Inspection of items Saturday October 31, 9am till 3pm

Pay & Pickup: Wednesday November 4^th.  & Thursday November 5^th., 2026, 9 AM–12 PM @ Location #1 7400 S. CLARE AVE. CLARE, MI. 48617

Note: Some Items are located at 2 separate locations 3.5 miles apart ~Location #2 is 3500 E. Hatton Rd. Harrison 48625

CLICK ON THE BLUE ICON BELOW FOR ONLINE BIDDING & REGISTRATION

VEHICLES

Trucks

2004 FORD F-650 PROLOADER S/A STAKE TRUCK, 275,452 MILES ,EXT. CAB, CAT 3126 DSL., MANUAL TRANS, W/ 8’X12’ METAL STAKE RACK & GOOSNECK BALL, RUNS, UNIT 07, VIN# 3FRNX65494V613928

2007 Ford F350 XL 4-door crew cab, 2WD pickup — parts truck, 8′ bed, auto trans, Powerstroke V-8 diesel engine, AS-IS, non-running. VIN 1FTSW30PX7EA10988

2007 Ford F350 4×4 Pickup, 146k, reg. cab, 8’ box, Replacement Jasper engine w/ 45k miles, vin#1FDSF31568EB33973

2000 Ford F-650 4×2 S/A stake truck, 8’x10′ steel stake rack w/ gooseneck ball, missing driver seat, 7-speed manual, 250,320 miles, AS-IS, Cat diesel. VIN 3FDNF6547YMA13595 — Unit #05

2000 Ford F-650 S/A stake truck, 8’x10′ steel stake rack w/ gooseneck ball — unit has been in loss/accident, AS-IS for parts. VIN N/A — Unit #06

2005 IHC 4300 4×2 S/A stake truck, 8’x14′ stake rack, Eaton DT466 diesel, manual transmission, weight 14,460 lb. VIN 1HTMMAM15H138901

Forklifts, Skid Steers & Equipment

1998 Boss 546-SC2, Side-Loading Forklift, 8,820 Cap.  Perkins LP Gas engine, 130″ height lift, 2WD chassis, SN 48304164C — starts and runs with issues, engine pops; caveat emptor

Caterpillar LP gas forklift, Model GPL40, truck weight 13,329 lb, 9,000 lb lift, 130″ 2-stage mast, SN 1CN0014 — dual front Eurosoft tires

Gehl 4840 E-Series wheeled skid loader, aux. hydraulics, O-ROPS, 1,419 hrs metered, 12-16.5 tires, SN 409590

Gehl 4625 SX wheeled skid steer, aux. hydraulics, 3,070 meter hrs, manual quick-attach, 10-16.5 tires

Hyster 9,000# LP gas hard-rubber-tire forklift, 129″ lift, side shift, 90″ HD forks, SN A24D1834P — unit weighs 20,100 lb.  Location #2

Crown walk-behind electric forklift, Model 30WTL — may need fresh batteries; w/ Hobart charging system

Husqvarna Z248F zero-turn mower, 48″ deck, Kawasaki 20 hp gas Model FR691V — motor blown

Attachments

Lowe Model 1650E hydraulic post auger, 18″ bit, universal quick-attach hookup

Mfg. universal hydraulic post auger, 16″ bit

Sheyenne universal skid-steer truss pole

Universal quick attach. Skidsteer hyd. Extend-a-boom jib w/truss setting hook

Hobart portable gas engine welder/genset

72″ universal quick-attach bucket

42″ universal quick-attach pallet forks

Trailers

2017 PJ 102″x30′ T/tandem-axle dual-wheel gooseneck flatbed trailer, 102″x8′ top bulkhead bed, oil-bath hubs, 235/85 R16, 8-bolt. VIN P5FD3022H1264706 unit 12

2003 Big Tex 25GN, 102″x24’+5′ B.T. Gooseneck trailer w/ flip-up flat-fold ramps, T/A dual-wheel oil-bath hubs, Plate #A381868. VIN #4k8gx242131611147

2007 Royal Cargo trailer, Model RST 7’x12’ TA2W, T/A enclosed tag trailer, white, R.H. front roof damage,. VIN 5LABE12288M0187

2018 PJ 102″x36′ dual-tandem gooseneck trailer, upper 8′ top deck w/ slide-in ramps, cargo 4″ nylon straps. VIN 4P5FD3025J6029881 — (Needs a new set of Landing Gear jacks, Damaged )Plate #D792514

2017 PJ 102″x30′ dual-tandem gooseneck trailer, w/ 8’x102″ upper top deck, no ramps. Vin# 4P5FD3020H1264705, Plate #D54724Z

Big Tex mfg. 86″x20′ tandem-axle tag trailer, 6-bolt rims, spring suspension, rear flip-up ramps.

Big Tex Model 10ET T/A tag trailer, 86″x16′ plus 3.5′, 6-bolt rims, spring suspension, flip-up rear ramps, 5,080 lb. VIN 16VEX2026H207441

7’x22′ tilt-bed implement trailer

Nash T/A pull-type camper trailer, approx. 23′

Damon Challenger Model 31RL 5th-wheel camper, T/A, converted to gooseneck hitch, 13′ slideout — with The Braun 12V

New Idea running gear, converted into a truss-moving wagon

Tennessee Mfg. 20′ towable work scaffolding / work platform, manual lift

Building Material Lumber, Laminated Beams & Poles

41 pcs 2x6x12′ Wolmanized laminated beams by Ohio Timberman (3-ply)

56 pcs 2-ply 3x6x14′ post blocking, Wolmanized lumber

30 pcs 3-ply 2x6x18′ Wolmanized laminated beams

89 pcs 3-ply 2x6x18′ Wolmanized laminated beams

30 pcs bunked 2x6x26′ 3-ply laminated beams — ground-rated poles, Southern #1 pine

56 pcs 2x6x10′ S.Y.P. lumber bunk

56 pcs 2x10x10′ S.Y.P. header plate carrier boards

80 pcs 2x10x12′ S.Y.P. header plate carrier boards

2 bunks — 30 pcs 3-ply 2x6x12′ laminated beams, pressure treated, factory wrapped

2 bunks — 30 pcs 3-ply 2x6x14′ pressure-treated laminated beams

27 pcs Spruce-Pine-Fir 2x6x16′ board lumber

56 pcs 2x6x18′ Southern yellow pine truss material board lumber

19 pcs 4/12 pitch, 48′ S.Y.P. trusses

13 pcs 32′ 4/12-pitch S.Y.P. 2×6-cord trusses

(255) 2″x6″x16′ Southern pine diagonal lumber

(392) 2″x6″x14′ Southern pine dimensional lumber

(126) 2″x6″x16′ Southern pine dimensional lumber

(80) 2″x10″x14′ Southern pine dimensional lumber

(128) 2″x6″x10′ Southern pine dimensional lumber

(128) 2″x6″x20′ Southern pine dimensional lumber

(67) 2″x10″x8′ water damaged dimensional lumber, stored outdoors

(77) 2″x10″x16′ water damaged dimensional lumber, stored outdoors

(80) 2″x10″x12′ water damaged dimensional lumber, stored outdoors

(70) 2″x10″x16′ water damaged dimensional lumber, stored outdoors

2″x6″x14′ treated dimensional lumber

(66) 4″x6″x20′ dimensional treated poles

Quantity of Wolmanized lumber, white lumber, and laminated beams in a bulk pile, hand-loaded by buyer —enough for a 30×40’+ pole barn?

Doors, Trim, Insulation & Hardware

(4) Trac-Rite 9′ roll-up overhead doors

Large quantity of insulated and non-insulated metal garage overhead door panels

8′ pole barn door track, round

NOS garage door track & rails, large quantity, sold in bulk — includes door springs

(4) CertainTeed R19 8’x50′ rolls, unfaced insulation

Bay Insulation 2’x48’x100′ WMP-B #8315, new rolls of roof blanket — (14) 25′, (17) 50′, (54) 100′

NOS Marco Industries 3/4″ rib closure

100+ boxes Eagle Mfg 5×7 and 5×8 metal truss plates

15+ boxes Tamlyn 7/16″ steel plywood clips

Large quantity of wood-binder and steel-binder Eclipse NOS boxes of torque screws

NOS pallets of rubber-washer nails, 50 lb boxes

Quantity of assorted pole barn metal end caps, assorted colors, mill steel mfg. Ceram-A-Star 1050 finish

Python 1″x6″ peak vent

Quantity of angle iron

2 pallets of 14″ pole cement pads / aka cookies

NOS 29 pcs Metrolux billboard lights, Model PA-17-W-400MH, gray color

6’x12′ outdoor letter sign

Approx. 41 pallets EDCO “Arrowline” Shingle Shake metal roofing

12 pallets Roof & Guard 36″x66.8′ rolls of underlayment, 25 per pallet, 2-square rolls

Steel Rolls  & Metal Former Unit

Schlebach Quadro 2A standing-seam roll forming machine, 230V 1-phase, SN 0700050598 — set up in 2008 Haulin 20′ T/A enclosed trailer, top-load coil door, slotted front in trailer which also feeds coil stock into machine from a truck bedmounted metal coil, forming machine mounted inside. VIN 5NHUHAV288W050967 sells as complete package.

Approx. 60 new, unused housed coil rolls of painted barn sheet steel, 1,000–3,000 lb per roll, various colors, purchased from Mill Steel Company Birmingham Alabama. Were told these Coils are produced and feature silicone-polyester Cool Chemistry system, engineered to give a 40 year film integrity. as hot dipped Galvanized Ceram-a-star 1050 finish. As a buyer, Please use Due diligence and do your research. Info provided to us is limited.

(43) NOS painted metal rolls

(12) unused 43″ painted NOS metal siding rolls, some up to 3,000 lb

(2) 3′ metal roofing roll spools

Shop Support Equipment

Forming, Punching, Shearing & Roll Equipment

Knudson Mfg hat channel forming machine, Model KH-153, digital control touchpad, SN 11908 — w/ roll stand and material

1999 Schechtl Model D-63533 Edling, Type MSB 310-CN, 3-phase, 10′ brake length, 14′ overall length x 48″ — w/ general purpose transformer phase boxes

1999 Schechtl Model D83533 Edling, 3-phase 230V, air-operated, Type MSB 310-BV trim flatstock cutter, 10′ cutting-width bed

Griffor Mfg. 2-cylinder short-stroke hydraulic punch press unit w/ Tobul accumulator, electric/hydraulic unit — 5,000 psi working pressure, Baldor 10 hp 3-phase electric motor

Swenson shear/snap table, portable unit, adjustable roof-panel cutting width 12″–24″ — 3-in-1 function: standing seam notcher, panel cutter, eave/valley hammer, up to 20 ga. thickness

Sage 36″-width manual slip roll machine, three adjustable carbon-steel rollers

NOS 2016 Ameripak mod. SRE 24(Econo Series) Maunal-semi auto Orbital stretch HorizontalWrap Machine, 24” dia. Load, 115v 1 ph., ½ hp motor

Flagler 48″ flat steel trim cutter/former, 120V 1-phase

48″ trim perforator/cutter on wood stand, w/ 1-phase 1/2 hp electric motor

Soffit perforator on stand

Jorns AG Norma Line folding machine Mod. 125-SM-CNC400A-6.4, 1999–2003 mfg. year, 480V, high-precision Swiss-made hydraulic long-length metal for complex sheet-metal folding in pole barn manufacturing — 21′ bending length, 39″ throat depth, SN 9897-10

Lamerson 12″x16″ truss press, 10 hp 1-phase hydraulic power unit, 20′ width, 7′ high, SN 5BZ14

Manual barn metal shear, 4/12 pitch

Pro Trak Tapco multi-angle 7-1/2 saw table, 3/12 to 12/12 pitch, 18″–20″ width material

AFG 2″x6″ pole laminate joint maker, 3 pcs., electric-over-air — makes joints in dimensional lumber

Chicago 14′ sheet metal brake, Model S-1422

Tapco 10′ aluminum portable manual brake

Electrical specifications 48″ shear, Model 1452-ES, 3-phase 230V, SN S-8751721

Scales, Racks & Attachments

Sterling 48″x48″ floor-model coil stock scale, Model 48×48-5, 5,000 lb capacity, SN 1507 — with SC 18×18-200 lb table-top scale, SN 8115, Sterling digital scale readout display

H.D. vertical steel 2-post storage rack, 72″w x 8’0″ x 12′ tall, 6 horizontal storage arms

10ft. metal table with built in Toledo platform scale, used for weighing screws

ONLINE TERMS: ONSITE PAY & PICKUP WEDNESDAY NOVEMBER 4th. & THURSDAY November 5, 2026 9AM TO 12PM. : CASH OR GOOD CHECK DAY OF ONSITE PICKUP. NOTHING REMOVED FROM PREMISES UNTIL SETTLED FOR.  REGISTRATION VIA sykoraauctions.proxibid.com ONLINE ONLY. ALL ITEMS SELL AS IS WHERE IS W/OUT WARRANTY. NOT RESPONSIBLE FOR ACCIDENTS OR ITEMS SOLD. ANNOUNCEMENTS ONLINE TAKE PRECEDENCE OVER PRINTED MATTER. INFO & SPECS OF EQUIPMENT IS TO THE BEST OF KNOWLEDGE, BUT SHOULD ONLY BE USED AS A GUIDE AND BUYERS SHOULD AVAIL THEMSELVES TO INSPECT ANY AND ALL ITEMS, LOADER AVAILABLE. 10% BP ONLINE BUYER’S TERMS ARE NOTED ON PROXIBID/Pioneer Pole Building ONLINE REGISTRATION;

* TITLED VEHICLE BROKERAGE: STATE REGULATIONS REQUIRE. 6% SALES TAX ON EVERY TITLED UNIT. & BUYERS WILL BE CHARGED A $95.00 TITLE BROKERAGE FEE PLUS $15.00 TITLE FEE, REG. FEES.  LICENSED VEHICLE DEALERS ARE EXEMPT, FARMERS ARE NOT. DEALERS WILL NEED A COPY OF YOUR MI. VEHICLE DEALERS WALL LICENSE

  Pay & Pickup: Wednesday November 4 & Thursday, November 5, 2026, 9 AM–12 PM @ Location #1 7400 S. CLARE AVE. CLARE, MI. 48167

Note: Items are located at 2 separate locations 3.5 miles apart ~Location #2 is 3500 E. Hatton Rd. Harrison 48625

PIONEER POLE BUILDINGS / PIODEL, INC.

7400 S. Clare Ave. Clare, MI 48617